Flight Plan Up-Load Broken

UKD192 · Post by **UKD192** » Wed Nov 14, 2007 4:31 am

Unable to export Flight Plan.
I know its the right format because I've tried downloading the current flight plan fromFlyNET and tried to upload it again but I get the following list of errors :- (I've only listed the first 3 lines - they are all the same) :-

Error on line 1: no flightnumber, no deptime, no arrtime, deptime not an integer, arrtime not an integer, couldn't find aircraft, simrate out of range,
Error on line 2: no flightnumber, no deptime, no arrtime, deptime not an integer, arrtime not an integer, couldn't find aircraft, simrate out of range,
Error on line 3: no flightnumber, no deptime, no arrtime, deptime not an integer, arrtime not an integer, couldn't find aircraft, simrate out of range,

If it helps these are lines I tried to upload (no word wrap I hasten to add):-

PDA9410,VTSP,OAKB,0100,0901,B764,37,8x,254v$,0,VTSP SID STN W17 RAN M770 KAKID M875 BUTOP W30W ASARI A466 KODAD DCT OAKB,,1234567
PDA9411,OAKB,VTSP,0941,1742,B764,37,8x,254v$,0,,,1234567
PDA9412,VTSP,UGEE,1842,0313,B764,37,8x,361v$,0,VTSP SID STN W17 RAN M770 KAKID M875 BUTOP W30W ASARI A466 DI J145 PARAK STAR UGEE ,,1234567

Cheers now
Rob

Post by **Konny** » Wed Nov 14, 2007 12:15 pm

Found the problem, should be fixed now.

UKD192 · Post by **UKD192** » Wed Nov 14, 2007 2:09 pm

Thanks Konny, its working fine now, thanks for the speedy fix

Cheers
Rob

Beluga · Post by **Beluga** » Sat Nov 17, 2007 12:18 am

Hi I have got the same problem:

Error on line 1: flightnumber too long, simrate out of range,
Error on line 2: simrate out of range,
Error on line 3: simrate out of range,
Error on line 4: simrate out of range,
Error on line 5: simrate out of range,
Error on line 6: simrate out of range,
Error on line 7: simrate out of range,
Error on line 8: simrate out of range,

Original:

MSL2200,LEMD,LEXJ,1500,1555,,252,1x,75v$,75,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------
MSL2201,LEXJ,LEMD,1655,1750,,252,1x,75v$,75,TITAN B42 RATAS/N0400F270 UN864 ORBIS,ALTN1LEVC ALTN2LEVD // FL270-310,-------
MSL2300,LEMD,LEBB,1400,1500,,8,1x,88v$,88,SIE UN858 DGO UL176 CEGAM,ALTN1LEVT ALTN2LEXJ // FL260-360,-------
MSL2301,LEBB,LEMD,1600,1700,,8,1x,85v$,85,AMTOS R75 NEA UN864 ORBIS,ALTN1LEVC ALTN2LEVD // FL260-320,-------
MSL2302,LEMD,LEBB,1800,1900,,1,1x,88v$,88,SIE UN858 DGO UL176 CEGAM,ALTN1LEVT ALTN2LEXJ // FL260-360,-------
MSL2303,LEBB,LEMD,1600,1700,,1,1x,85v$,85,AMTOS R75 NEA UN864 ORBIS,ALTN1LEVC ALTN2LEVD // FL260-320,-------
MSL2304,LEMD,LEBB,2100,2200,,252,1x,88v$,88,SIE UN858 DGO UL176 CEGAM,ALTN1LEVT ALTN2LEXJ // FL260-360,-------
MSL2305,LEBB,LEMD,1600,1700,,252,1x,85v$,85,AMTOS R75 NEA UN864 ORBIS,ALTN1LEVC ALTN2LEVD // FL260-320,-------

This is for 8 FP, What can I do?

Thanks

UKD192 · Post by **UKD192** » Sat Nov 17, 2007 4:49 am

Hi,

You have not entered the aircraft ICAO, ( MD82)
MSL2200,LEMD,LEXJ,1500,1555,,252,1x,75v$,75,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------

Should be

MSL2200,LEMD,LEXJ,1500,1555,MD82,252,1x,75v$,75,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------

Also, another field has been entered and so the csv file should be in the following format:-

PDA150,NFFN,YPDN,0200,0915,B742,283,,4x,294v$,0,MI ALBAB B599 ATPEN S20E160 G591 CS J61 JANUS DN,,1234567
Note the double ,, after the a/c type number B742,283,,4x (this is where the a/c reg would go)

HTH
Rob

Beluga · Post by **Beluga** » Sun Nov 18, 2007 3:27 pm

Hi!Thank you for your enquiry but...don´t entry this:

MSL2200,LEMD,LEXJ,1500,1555,MD82,252,,1x,75v$,75,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------
MSL2201,LEXJ,LEMD,1655,1750,MD82,252,,1x,75v$,75,TITAN B42 RATAS/N0400F270 UN864 ORBIS,ALTN1LEVC ALTN2LEVD // FL270-310,-------

or this:

MSL2200,LEMD,LEXJ,1500,1555,MD82,252,1x,75v$,75,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------
MSL2201,LEXJ,LEMD,1655,1750,MD82,252,1x,75v$,75,TITAN B42 RATAS/N0400F270 UN864 ORBIS,ALTN1LEVC ALTN2LEVD // FL270-310,-------

This errors:

Error on line 1: flightnumber too long, simrate out of range,
Error on line 2: simrate out of range,

Is my problem?
Thanks

Miguel Mozo

Marc Joy · Post by **Marc Joy** » Sun Nov 18, 2007 8:11 pm

MSL2200,LEMD,LEXJ,1500,1555,MD82,252,1x,75v$,75,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------

After your 75v$, I read again a 75... I don't know what it stand for... Ok got it the flight type (scheduled or training I think...)

On an exported flightplan of mine and also on the first one of this post I read here, I see a 0...
do not forget to also add the days of the week at the end of your line instead of -------, you should mabe try a 1234567

but here's the mistake
MSL2200,LEMD,LEXJ,1500,1555,MD82,252,,1x,75v$,0,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------

Notice in red the BIG comma that is missing in your line... and do not forget to chage the 75 with a 0 (zero)

This is the line I used for a try in my flightplan, and it worked...
MSL2200,LEMD,LEXJ,1500,1555,MD82,252,,1x,75v$,0,SIE UN865 BGS R753 EMANU,ALTN1LEBB ALTN2LEAS // FL280-340,-------

Marc

Beluga · Post by **Beluga** » Tue Nov 20, 2007 10:35 pm

Thanks friends!! Now, I can upload FPs.

Miguel Mozo