Arrived but FlyNET won't go off of taxi...
Moderator: FSAirlines Staff
Arrived but FlyNET won't go off of taxi...
So I tried to fly TAL220, KSFO-KPDX earlier tonight, and after I landed I taxiied to the gate, shut down engines, opened the door, and had the parking brake on, but the client still showed 'Taxi' and wouldn't show my results. I landed at the right airport and really couldn't figure out what else to do, so I closed FS - now it's back to booked state again! How can I get credit for this flight?
-
- Captain
- Posts: 417
- Joined: Sat Jun 03, 2006 8:36 am
- Location: The middle of a bloody desert - surrounded by bright lights, long legged women and Paupers
- Contact:
Konny
One of my guys had the same problem tonight going from LAS-OKC taxied to the gate - put the hand brake on and waitied for almost 12 minutes and it never came out of taxi -- AMychance you can look at that as well VHA7500 LAS-OKC last night
Leif
One of my guys had the same problem tonight going from LAS-OKC taxied to the gate - put the hand brake on and waitied for almost 12 minutes and it never came out of taxi -- AMychance you can look at that as well VHA7500 LAS-OKC last night
Leif
Ho'olu komo la kaua
Leif Harding
Chief Cook and Bottle Washer
Venture Hawaii PLC
Leif Harding
Chief Cook and Bottle Washer
Venture Hawaii PLC
- cmdrnmartin
- FSAirlines DB Admin
- Posts: 1343
- Joined: Thu Dec 22, 2005 5:54 am
- Location: CYWG
If your client state says "Taxi"
The client never recorded your take off.
The client States are:
In Hangar
Boarding (Activated with start of client)
Taxi (Activated when Plane passes 5 knots GS)
Takeoff (signified by the beep, this is not a true state)
Climb (When you are airborne and climbing)
Cruise (Level Flight)
Descent (Self Explanatopry)
Landed (Activated on contact with the ground, 1 minute later, all the way until you apply the parking brake)
The issue you may be having might come from the flight tracker. I myself have had issues with it, and I simply turn it off, which has eliminated all instances of the client not recording my landing or takeoffs.
Cheers,
The client never recorded your take off.
The client States are:
In Hangar
Boarding (Activated with start of client)
Taxi (Activated when Plane passes 5 knots GS)
Takeoff (signified by the beep, this is not a true state)
Climb (When you are airborne and climbing)
Cruise (Level Flight)
Descent (Self Explanatopry)
Landed (Activated on contact with the ground, 1 minute later, all the way until you apply the parking brake)
The issue you may be having might come from the flight tracker. I myself have had issues with it, and I simply turn it off, which has eliminated all instances of the client not recording my landing or takeoffs.
Cheers,
Hi,
One of my pilots has had same problem today, client hung on taxi. Not sure if it was taxi at start or taxi at dest, although he reports that the client WAS updating. He even took off again, did a circuit and landed but still showed taxi.
Rgds
John
One of my pilots has had same problem today, client hung on taxi. Not sure if it was taxi at start or taxi at dest, although he reports that the client WAS updating. He even took off again, did a circuit and landed but still showed taxi.
Rgds
John
CEO - Classic British Flight Services
Classic aircraft on Classic routes
Classic aircraft on Classic routes