Fuelling

Post by **cmdrnmartin** » Fri Oct 12, 2007 3:39 am

Ok, just noticed something.

In the older versions of flynet, the first refueling option, would show the total in the tanks of the aircraft, and you could switch between pounds and kilos.
You set the amount of fuel total that you wanted for the flight. The system would subtract what was in the tanks from the total, to see how much you added.

The new client, does not let you see what is in the tanks already, and when you put in a number, it is added to the amount already in the tanks.

For example, If I have 10 000lbs in the plane, and I need 15000, the old system would show up with 10000 in the box already. I would write in '15000' and at the end of the flight, I would be charged for 5000lbs of fuel.

The new one, in the same situation, shows up with zero in the box, and if I put in 15000, adds 15000 to the tanks, so I end up with 25000lbs, and I get charged for 15000...

I like the first system better, can we revert to that for refueling under the 'standard' option?

Stan · Post by **Stan** » Fri Oct 12, 2007 9:08 am

The amount in the tanks is shown underneath but not in the box.

Post by **cmdrnmartin** » Fri Oct 12, 2007 1:19 pm

I'll have to check, is this in the standard mode, or in the individual tank filling mode?

vaccaro · Post by **vaccaro** » Fri Oct 12, 2007 1:47 pm

Strange.
Everything normal at my side.