Model Installation Instructions
Step 1: Replace the model file in the 'Model' folder with the corresponding one here.
Step 2: Copy all the entries between and including [CameraDefinition.0] and [CameraDefinition.003] from the default A321 Aircraft.cfg and paste them below the [fltsim*] entries in ours. (These are localised.)
Step 3: Replace the [views], [exits], [lights] and [smokesystem] entries in the Aircraft.cfg with the ones below:
For the A318:
[Views]
eyepoint=49.22074, -1.73061, 4.355627
[Exits]
number_of_exits=4
exit_rate.0=0.19
exit_rate.1=0.02
exit_rate.2=0.19
exit_rate.3=0.17
[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -57.70, 0.00, 4.70, fx_navwhi320pa ,
light.1=2, -57.75, 0.00, 4.70, fx_strobe2320pa ,
light.2=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.3=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.4=4, 20.11, 0.00, 4.00, fx_vclight ,
//light.4=4, 36.11, 0.00, 4.00, fx_vclight (original)
light.5=5, 12.570000, -10.48, -5.81, fx_PAland ,
light.6=5, 12.570000, 10.48, -5.81, fx_PAland ,
[Smokesystem]
smoke.0=-17.4, -43.8, 1.04, fx_contrail_320
smoke.1=-17.4, 43.8, 1.04, fx_contrail_320
For the A319:
[Views]
eyepoint=49.22074, -1.73061, 4.355627
[Exits]
number_of_exits=4
exit_rate.0=0.19
exit_rate.1=0.02
exit_rate.2=0.19
exit_rate.3=0.17
[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -62.00, 0.00, 4.70, fx_navwhi320pa ,
light.1=2, -62.10, 0.00, 4.70, fx_strobe2320pa ,
light.2=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.3=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.8=4, 41.827, 0.00, 5.01, fx_vclight ,
light.5=5, 12.570000, -10.48, -5.81, fx_PAland ,
light.6=5, 12.570000, 10.48, -5.81, fx_PAland ,
[Smokesystem]
smoke.0=-17.4, -43.8, 1.04, fx_contrail_320
smoke.1=-17.4, 43.8, 1.04, fx_contrail_320
For the A320:
[Views]
eyepoint=49.22074, -1.73061, 4.355627
[Exits]
number_of_exits=4
exit_rate.0=0.19
exit_rate.1=0.02
exit_rate.2=0.19
exit_rate.3=0.17
[Lights]
light.0=3, -13.90, -55.25, 2.45, fx_navred320pa
light.1=3, -13.90, 55.25, 2.45, fx_navgre320pa
light.2=3, -69.70, 0.00, 4.70, fx_navwhi320pa ,
light.3=2, -69.70, 0.00, 4.70, fx_strobe2320pa ,
light.4=2, -13.95, -55.25, 2.45, fx_strobe320pa
light.5=2, -13.95, 55.25, 2.45, fx_strobe320pa
light.6=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.7=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.8=4, 45.827, 0.00, 5.01, fx_vclight ,
light.9=5, 11.570000, -10.48, -5.81, fx_PAland ,
light.10=5, 11.570000, 10.48, -5.81, fx_PAland ,
[Smokesystem]
smoke.0=-17.4, -43.8, 1.04, fx_contrail_320
smoke.1=-17.4, 43.8, 1.04, fx_contrail_320
Step 4: Extract the following file in your root Effects directory.
fx_PAland.zip
(550 Bytes) Downloaded 464 times
Step 5: Profit!
VC Installation Instructions
Tom wrote:
STEP ZERO:
BACKUP YOUR PROJECT AIRBUS AIRCRAFT FOLDER
STEP1:
copy panel, sound and soundai folders from the default Airbus_A321 folder into your PA airbus aircrafts folder.
STEP2:
copy all .dds and .cfg files except thumbnail.jpg from the default Airbus_A321/texture folder into your PA airbus aircrafts/texture folder.
STEP3:
copy Airbus_A321_interior.mdl from the default Airbus_A321/model folder into your PA airbus aircrafts/model folder.
STEP4:
open the model.cfg from your PA airbus aircrafts/model folder and add the following line:
interior=Airbus_A321_interior
