Project Airbus Users

[flightsimer]

all Pairbus users, i would suggest downloading everything you may possibly need/want. they just said they were closing

this also means they wont be finishing their A380 that was almost complete

[lexarne]

Well that is a kick in the teeth isnt it ... i was looking forward to the A380

[CAPFlyer]

Umm, I wouldn't worry about rushing to download Project Airbus products. They're all hosted on AVSIM, so they'll be available for download until AVSIM closes.

[flightsimer]

not all of their files are though... the A320 family mdl file to make them totally work in FSX is only available at their site... at least i couldnt find it on avsim...

[alasizon]

not all of their files are though... the A320 family mdl file to make them totally work in FSX is only available at their site... at least i couldnt find it on avsim...

PA officially closed down their download section today so it is no longer available so all the mdl files in there are unavailable though you should be able to find them in a download or two somewhere

[flightsimer]

if anybody needs a mdl file for either the cfm or iae A319 or A320, just pm me and ill email it to you... i downloaded them the other day... i also have the pazip so i can send that as well

also im just pasteing this into here just to make sure its always available to people who use them for FSA

Model Installation Instructions

Step 1: Replace the model file in the 'Model' folder with the corresponding one here.

Step 2: Copy all the entries between and including [CameraDefinition.0] and [CameraDefinition.003] from the default A321 Aircraft.cfg and paste them below the [fltsim*] entries in ours. (These are localised.)

Step 3: Replace the [views], [exits], [lights] and [smokesystem] entries in the Aircraft.cfg with the ones below:

For the A318:

[Views]
eyepoint=49.22074, -1.73061, 4.355627

[Exits]
number_of_exits=4
exit_rate.0=0.19
exit_rate.1=0.02
exit_rate.2=0.19
exit_rate.3=0.17

[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -57.70, 0.00, 4.70, fx_navwhi320pa ,
light.1=2, -57.75, 0.00, 4.70, fx_strobe2320pa ,
light.2=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.3=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.4=4, 20.11, 0.00, 4.00, fx_vclight ,
//light.4=4, 36.11, 0.00, 4.00, fx_vclight (original)
light.5=5, 12.570000, -10.48, -5.81, fx_PAland ,
light.6=5, 12.570000, 10.48, -5.81, fx_PAland ,


[Smokesystem]
smoke.0=-17.4, -43.8, 1.04, fx_contrail_320
smoke.1=-17.4, 43.8, 1.04, fx_contrail_320

For the A319:

[Views]
eyepoint=49.22074, -1.73061, 4.355627

[Exits]
number_of_exits=4
exit_rate.0=0.19
exit_rate.1=0.02
exit_rate.2=0.19
exit_rate.3=0.17

[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=3, -62.00, 0.00, 4.70, fx_navwhi320pa ,
light.1=2, -62.10, 0.00, 4.70, fx_strobe2320pa ,
light.2=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.3=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.8=4, 41.827, 0.00, 5.01, fx_vclight ,
light.5=5, 12.570000, -10.48, -5.81, fx_PAland ,
light.6=5, 12.570000, 10.48, -5.81, fx_PAland ,

[Smokesystem]
smoke.0=-17.4, -43.8, 1.04, fx_contrail_320
smoke.1=-17.4, 43.8, 1.04, fx_contrail_320

For the A320:

[Views]
eyepoint=49.22074, -1.73061, 4.355627

[Exits]
number_of_exits=4
exit_rate.0=0.19
exit_rate.1=0.02
exit_rate.2=0.19
exit_rate.3=0.17

[Lights]
light.0=3, -13.90, -55.25, 2.45, fx_navred320pa
light.1=3, -13.90, 55.25, 2.45, fx_navgre320pa
light.2=3, -69.70, 0.00, 4.70, fx_navwhi320pa ,
light.3=2, -69.70, 0.00, 4.70, fx_strobe2320pa ,
light.4=2, -13.95, -55.25, 2.45, fx_strobe320pa
light.5=2, -13.95, 55.25, 2.45, fx_strobe320pa
light.6=1, 6.8, 0.00, -5.80, fx_beacon320pa ,
light.7=1, 3.83, 0.00, 8.47, fx_beacon320pa ,
light.8=4, 45.827, 0.00, 5.01, fx_vclight ,
light.9=5, 11.570000, -10.48, -5.81, fx_PAland ,
light.10=5, 11.570000, 10.48, -5.81, fx_PAland ,

[Smokesystem]
smoke.0=-17.4, -43.8, 1.04, fx_contrail_320
smoke.1=-17.4, 43.8, 1.04, fx_contrail_320

Step 4: Extract the following file in your root Effects directory.
fx_PAland.zip
(550 Bytes) Downloaded 464 times

Step 5: Profit!


VC Installation Instructions

Tom wrote:

STEP ZERO:
BACKUP YOUR PROJECT AIRBUS AIRCRAFT FOLDER
STEP1:
copy panel, sound and soundai folders from the default Airbus_A321 folder into your PA airbus aircrafts folder.

STEP2:
copy all .dds and .cfg files except thumbnail.jpg from the default Airbus_A321/texture folder into your PA airbus aircrafts/texture folder.

STEP3:
copy Airbus_A321_interior.mdl from the default Airbus_A321/model folder into your PA airbus aircrafts/model folder.

STEP4:
open the model.cfg from your PA airbus aircrafts/model folder and add the following line:
interior=Airbus_A321_interior

[flightsimer]

ok, since avsim is down if anybody needs files, ask me i might have them... i only have A319 or A320 stuff though