Scenery/Terrain constantly reloading
Moderator: FSAirlines Staff
Scenery/Terrain constantly reloading
I've tried 3 times now to fly VHHH to YSSY in a B772. All is normal till a short time after reaching cruising altitude. Then FS9 starts to reload scenery and terrain every few seconds, shortly after that the client crashes and the flight is no longer being monitored... but... the constant reloading of scenery and terrain stops and the flight is smooth & normal. Shutting down FS9 since there's no point continuing, I go to the VA site and it's like the flight never happened.
I tried changing the 1 to a 0 in the flynet.ini but still had the same result. In order to stop the monitoring I assume that I'd need to pull the cable out of my modem and then plug it back in before parking the plane at destination (?)
I haven't had this problem with any other flights, which have been in N. America and other planes than the B777.
I'm using v06.9b of the client with FS9. Does any of this sound familiar to anyone else?
Thanx!
I tried changing the 1 to a 0 in the flynet.ini but still had the same result. In order to stop the monitoring I assume that I'd need to pull the cable out of my modem and then plug it back in before parking the plane at destination (?)
I haven't had this problem with any other flights, which have been in N. America and other planes than the B777.
I'm using v06.9b of the client with FS9. Does any of this sound familiar to anyone else?
Thanx!
George "Alky®" Fisher
- avalonceo
- Flight Attendant
- Posts: 80
- Joined: Tue Nov 14, 2006 11:02 pm
- Location: St. John's, NL
- Contact:
It actually doesn't sound like a client problem and more of a corrupt scenery problem. Have you recently installed any scenery (for that part of the world)? If not, the fact that it happens at cruise leads me to believe it might actually be corrupt default scenery. I hate suggesting this to anyone, but a re installation or repair might be the solution.
-
- Captain
- Posts: 214
- Joined: Thu Feb 01, 2007 11:32 am
- Location: Sao Paulo, Brasil
Try using FSManager to sort your scenery out.But to get FSM to work you have to set your computers date back to about 1999.Before doing this make sure to turn off your internet security programs(Norton,etc.).When scenery is sorted change computer date back to todays date and turn on your internet security.
Yours Stan
-
- FSAirlines Developer
- Posts: 1564
- Joined: Sun Sep 25, 2005 10:40 am
- Location: Munich, Germany
- Contact:
This is a bug of the current client. There a is a system which should prevents people from changing the time during flight which sometimes goes crazy. I don't know when this happens, might have something to do with the crossing of the dateline or when you're flying at midnight ( local or utc ? ).
We don't do anymore changes to the current client, but please be patient, our completely rewritten client will be out soon.
We don't do anymore changes to the current client, but please be patient, our completely rewritten client will be out soon.
Konrad - FSAirlines Developer
Thanx Konny, that might be it. Sorry I've been away for a couple of days and not able too delve into this too much. In total I made 5 attempts at taking a B-777 from Hong Kong to Australia and the constant scenery terrain loading would start about a third of the way out. I made one attempt at going from Hong Kong to Britain and the same thing happened, I even unchecked most all but the basic default scenery, no difference. After a time of the scenery/terrain doing this the client would shut off by itself and the computer in most cases froze except for the mouse. I live on the west coast of Canada and I believe my flights were around midnight GMT (?)
I thank you all for providing assistance and I'll see if I can get this flight in, perhaps at a different time
I thank you all for providing assistance and I'll see if I can get this flight in, perhaps at a different time
George "Alky®" Fisher
I tried one more time and no soap!
I canceled my lease of the B-777 and now I have a bigger problem... I'm (pilot) stuck in VHHH and my profile says I'm -27,000+v$ Now why would the system charge me $27 million to transfer $27 thousand??
I own 2 planes which now I'll have to sell for scrap and delete my VA and start again because I don't have $27 million to bring my pilot back to the home airport!!! This whole thing is a nightmare
I canceled my lease of the B-777 and now I have a bigger problem... I'm (pilot) stuck in VHHH and my profile says I'm -27,000+v$ Now why would the system charge me $27 million to transfer $27 thousand??
I own 2 planes which now I'll have to sell for scrap and delete my VA and start again because I don't have $27 million to bring my pilot back to the home airport!!! This whole thing is a nightmare
George "Alky®" Fisher
Hi,
If it's a timezone crossing issue, you could try the solution per this post and see if it helps :
http://flynet.turksim.org/forum/viewtop ... t=timezone
Regards
John
If it's a timezone crossing issue, you could try the solution per this post and see if it helps :
http://flynet.turksim.org/forum/viewtop ... t=timezone
Regards
John
CEO - Classic British Flight Services
Classic aircraft on Classic routes
Classic aircraft on Classic routes
Thanx John, whatever the problem was, I fixed it! I removed FS9 and started all over. I installed the Timezone 3.0 package and took off and landed without a problem using a nearly bare bones FS9Quantum wrote:Hi,
If it's a timezone crossing issue, you could try the solution per this post and see if it helps :
http://flynet.turksim.org/forum/viewtop ... t=timezone
Regards
John
Thanx everyone for your help
George "Alky®" Fisher
-
- Flight Attendant
- Posts: 83
- Joined: Thu Mar 27, 2008 9:39 pm
- Location: Breda, the Netherlands
- Contact:
Re:
It is definitely not a scenery problem as this happens to in the middle of the Atlantic and I don't have/need any scenery of the Atlantic.avalonceo wrote:It actually doesn't sound like a client problem and more of a corrupt scenery problem. Have you recently installed any scenery (for that part of the world)? If not, the fact that it happens at cruise leads me to believe it might actually be corrupt default scenery. I hate suggesting this to anyone, but a re installation or repair might be the solution.
All of a sudden the terain etc is reloaded every few seconds and after a little while everything has crashed.
In another message I read:
quoting: "If it's a timezone crossing issue, you could try the solution per this post and see if it helps :
http://flynet.turksim.org/forum/viewtop ... t=timezone
end of quote.
The URL is unfortunately incorrect. The page does not exist.
Soon I need some help as I cannot fly with Flynet client anymore when the flight takes more than approx 1,5 hours. See also my messages elsewhere about the simulator crashing.
Regards,
Ruud.
Ruud.
-
- Flight Attendant
- Posts: 83
- Joined: Thu Mar 27, 2008 9:39 pm
- Location: Breda, the Netherlands
- Contact:
Re: Scenery/Terrain constantly reloading
A solution found, not very charming, but is possible again without reloading scenery and terrain every 2 minutes. See my message of today in "unexplained crashes."
Regards,
Ruud.
Ruud.
Re: Scenery/Terrain constantly reloading
Hi,
here's the corrected url for the old post :-
http://www.fsairlines.net/forum/viewtop ... t=timezone
Regards
John
here's the corrected url for the old post :-
http://www.fsairlines.net/forum/viewtop ... t=timezone
Regards
John
CEO - Classic British Flight Services
Classic aircraft on Classic routes
Classic aircraft on Classic routes